Table of Contents
Advertisement
Chapter 5
CLI Commands
dspconcnt
To display counter configuration data (channel state) of a connection, use the dspconcnt command in
the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
lcn
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the counter configuration data for LCN 136 is displayed:
dspconcnt 136
ChanNum:
Chan State:
Chan XMT ATM State:
Chan RCV ATM State:
Chan Status Bit Map:
OAM Lpb Lost Cells:
AAL2 HEC Errors:
AAL2 CRC Errors:
AAL2 Invalid OSF Cells:
AAL2 Invalid Parity Cells:
AAL2 CPS Packet Xmt:
AAL2 CPS Packet Rcv:
AAL2 Invalid CID CPS:
AAL2 Invalid UUI CPS:
AAL2 Invalid Len. CPS:
AAL5 Invalid CPI:
AAL5 oversized SDU PDU:
AAL5 Invalid Len. PDU:
AAL5 PDU CRC32 Errors:
Related Commands
Command
addcon
delcon
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspconcnt lcn
Logical channel number for which to display counter configuration data. It can be in
the range from 131 to 510.
Description
Adds a PVC connection between a VISM card and any SM or PXM card.
Deletes a connection (PVC) between a VISM card and a Cisco MGX 8000 Series
platform PXM card.
136
alarm
Sending AIS OAM
Receiving AIS OAM
0x6
75599
0
0
0
0
0
0
0
0
0
0
0
0
0
Cisco VISM Installation and Configuration Guide
dspconcnt
5-333
Advertisement
Table of Contents
