Definitions; Textual Conventions - Cisco MCS-7825-H3-IPC1 Service Manual

CISCO-CCM-MIB

Definitions

The following definitions are imported for CISCO-CCM-MIB:
•
•
•
•
•
•
•

Textual Conventions

CcmIndex ::= TEXTUAL-CONVENTION
CcmIndexOrZero ::= TEXTUAL-CONVENTION
CcmDevRegFailCauseCode ::= TEXTUAL-CONVENTION
Cisco Unified Communications Manager Managed Services Guide
7-14
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Counter32,
Integer32, Unsigned32
From SNMPv2-SMI—DateAndTime, TruthValue, MacAddress, TEXTUAL-CONVENTION
From SNMPv2-TC—SnmpAdminString
From SNMP-FRAMEWORK-MIB—MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
From SNMPv2-CONF—ciscoMgmt
From CISCO-SMI—InetAddressType, InetAddress, InetPortNumber
From INET-ADDRESS-MIB
DISPLAY-HINT d
STATUS current
DESCRIPTION
This syntax is used as the Index into a table. A positive value is used to identify a unique entry in
the table.
SYNTAX Unsigned32(1..4294967295)
DISPLAY-HINT d
STATUS current
DESCRIPTION
This textual convention is an extension of the CcmIndex convention. The latter defines a greater than
zero to identify an entry of the CCM MIB table in the managed system. This extension permits the
additional value of zero. The value zero is object-specific and must be defined as part of the
description of any object that uses this syntax.
SYNTAX Unsigned32 (0..4294967295)
STATUS current
DESCRIPTION
This syntax is used as means of identifying the reasons for a device registration failure. The scope
of this enumeration can expand to comply with RFC 2578.
noError: No Error
unknown: Unknown error cause
noEntryInDatabase: Device not configured properly in the Cisco Unified CM database
databaseConfigurationError: Device configuration error in the Cisco Unified CM database
Chapter 7 Cisco Management Information Base
OL-22523-01