Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 460

dspcasvarendpts
dspcasvarendpts
To display all endpoints associated with a specified channel associated signaling (CAS) variant name,
use the dspcasvarendpts command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2
trunking operating mode.
Syntax Description
var-name
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples The following example shows that the endpoints associated with the var1 CAS variant are displayed:
dspcasvarendpts var1
Related Commands Command
dspcasendpts Displays data about configured CAS endpoints.
Cisco VISM Installation and Configuration Guide
5-316
dspcasvarendpts var-name
Name of the CAS variant; a text string of 1 to 64 alphanumeric characters.
Description
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands