Table of Contents
Advertisement
adddnip
adddnip
To add the IP addresses for a domain name that you added by using the adddn command, use the
adddnip command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating
modes.
Syntax Description
resol-num
domain-name
ip-addr
addr-order
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that resolution number 22 is configured for domain name callagent35,
with IP address 209.165.200.224, and an address resolution preference order of 7 (low):
adddnip 22 callagent35 209.165.200.224 7
Related Commands
Command
adddn
cnfdn
cnfdnssrvr
deldn
deldnip
dspdnallips
dspdnips
dspdns
dspdnssrvr
Cisco VISM Installation and Configuration Guide
5-18
adddnip resol-num domain-name ip-addr addr-order
Resolution number of the domain name. It can be in the range from 1 to 88.
Call agent name. A text string of 1 to 64 alphanumeric characters.
IP address which corresponds to the domain-name argument value. It must be in the
following format: nnn.nnn.nnn.nnn.
IP address resolution preference order in the range from 1 (highest) to 8.
Note
The preference order must be unique for all IP addresses in the call agent
name you specify with the domain-name argument.
Description
Adds a domain name (call agent name) and optionally configures the resolution
type of the domain name.
Configures the resolution type of a specified domain name.
Designates a domain name as a DNS.
Deletes a domain name.
Deletes a statistically provisioned IP address of a domain name.
Displays all statistically provisioned IP addresses and externally resolved IP
addresses for all domain names configured on the current VISM card.
Displays all statistically provisioned and externally resolved IP addresses
configured for a specified domain name.
Displays the configuration data of all domain names of a call agent.
Displays the domain name of the configured DNS of the current VISM card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
