Table of Contents
Advertisement
Chapter 5
CLI Commands
dspsarcnt
To display the segmentation and reassembly (SAR) counter values for a specified channel, use the
dspsarcnt command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
Syntax Description
lcn
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the SAR counter values for logical channel number 132 are displayed:
dspsarcnt 132
SarShelfNum:
SarSlotNum:
SarChanNum:
Total Cells:
Total CellsCLP:
Total CellsAIS:
Total CellsFERF:
Total CellsEnd2EndLpBk: 0
Total CellsSegmentLpBk: 0
RcvCellsDiscOAM:
Related Commands
Command
dspsarcnts
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspsarcnt lcn
Logical channel number of the connection for which you want to display SAR
counter values; in the range from 131 to 510.
1
17
132
---------------
69486
0
0
0
Description
Displays the SAR counter values for a VISM card.
Tx
Rx
---------------
60243
0
0
0
0
0
2151467320
Cisco VISM Installation and Configuration Guide
dspsarcnt
5-419
Advertisement
Table of Contents
