Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 462

dspcasxgcps
dspcasxgcps
To display timer parameters for the channel associated signaling/gateway control protocol (CAS/xGCP)
backhaul, use the dspcasxgcps command in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples The following example shows that the CAS/xGCP backhaul timer parameters are displayed:
dspcasxgcps
VariantName
-----------
Related Commands
There are no related commands.
Cisco VISM Installation and Configuration Guide
5-318
dspcasxgcps
FileName
--------
first wink.dod
second ring.dod
ReXmitTime InitReXmitTime
----------- --------------
500 100
500 100
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
Retry
-----
4
4