Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 482

dspdnips
dspdnips
To display all statistically provisioned and externally resolved IP addresses configured for a specified
domain name, use the dspdnips command in the VoIP switching/trunking and switched AAL2 PVC
operating modes.
Syntax Description
domain-name
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples The following example shows that all statistically provisioned and externally resolved IP addresses
configured for domain name callagent99 are displayed:
dspdnips callagent99
ResolutionIndex
---------------
Related Commands Command
adddn
adddnip
cnfdn
cnfdnssrvr
deldn
deldnip
dspdnallips
dspdns
dspdnssrvr
Cisco VISM Installation and Configuration Guide
5-338
dspdnips domain-name
Call agent name. A text string of 1 to 64 alphanumeric characters.
DomainName
----------
2 callagent99
45 callagent99
70 callagent99
Description
Adds a domain name (call agent name) and optionally configures the resolution type
of the domain name.
Adds the IP addresses for a domain name that you added by using the adddn
command.
Configures the resolution type of a specified domain name.
Designates a domain name as a DNS.
Deletes a domain name.
Deletes a statistically provisioned IP address of a domain name.
Displays all statistically provisioned IP addresses and externally resolved IP
addresses for all domain names configured on the current VISM card.
Displays the configuration data of all domain names of a call agent.
Displays the domain name of the configured DNS of the current VISM card.
IP Preference
--------------- ----------
nnn.nnn.nnn.nnx
nnn.nnn.nnn.nxn
nnn.nnn.nnn.xnn
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5
1
3
4
CLI Commands