Table of Contents
Advertisement
cnfprofparams
cnfprofparams
To configure a profile preference, use the cnfprofparams command in the switched AAL2 PVC and
AAL2 trunking operating modes.
Syntax Description
profile-type
profile-num
profile-pref
Command Modes
Switched AAL2 PVC and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the ITU profile type, profile number 1 is configured with the midrange
preference level of 4:
cnfprofparams 1 1 4
Related Commands
Command
dspprofparams
Cisco VISM Installation and Configuration Guide
5-194
cnfprofparams profile-type profile-num profile-pref
The profile type to be used for the CID. It can be one of the following values:
1 = International Telecommunication Union (ITU) I.366.2
•
3 = Custom
•
Number of the profile. It can be one of the following values:
•
1 = ITU profile type
•
2 = ITU profile type
•
3 = ITU profile type
7 = ITU profile type
•
8 = ITU profile type
•
12 = ITU profile type
•
100 = custom profile types
•
101 = custom profile types
•
•
110 = custom profile types
•
200 = custom profile types
Profile preference. It can be one of the following values:
0 = No preference; exclude the profile from xGCP profile negotiation
•
In the range from 1 (highest preference; default) to 10 (lowest preference)
•
Description
Displays the profile elements and preferences for all profiles.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
