Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 198

clralmcnts
clralmcnts
To clear all the alarm counters and statistics on a VISM card, use the clralmcnts command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
All counters are reset to 0 after you execute this command. The terminal display does not indicate a
response to this command.
Examples
The following example shows that the alarm counters and statistics are removed for the current VISM
card:
clralmcnts
Related Commands Command
clralmcnt
dspalmcnt
Cisco VISM Installation and Configuration Guide
5-54
clralmcnts
Description
Clears the alarm counters and statistics on a VISM line.
Displays the alarm counters and statistics for the current VISM card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands