Table of Contents
Advertisement
Chapter 5
CLI Commands
Table 5-1
Syntax Item
cadence-4-on
cadence-4-off
1. To specify amplitudes of DTMF and MFR1 tones, you must use the following syntax: dtmf_digit amp-low amp-high or
Note
The appropriate tone plan file, with associated region and version, is downloaded, parsed, and stored in
memory when you use this command.
Examples
The following example shows that the tone plan file name singp_3, with region singapore and version
number 11, is added to the current VISM card:
addtoneplan singapore 11 singp_3
Related Commands
Command
cnflnringback
cnflntoneplan
cnflntonetimeout
dellntoneplan
deltoneplan
dsplnringback
dsplntoneplan
dsplntonetimeout
dsptonebuiltinplans Displays all preconfigured (built-in) tone plans on the current VISM card.
dsptoneplan
dsptoneplans
dsptoneprovplans
dsptoneregionplans Displays a list of all tone plans for the countries and regions whose name
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Tone Plan Definition File Syntax (continued)
Description
(Optional) The fourth on time that the tone plays, defined in milliseconds.
(Optional) The fourth off time that the tone does not play, defined in
milliseconds.
mf_r1_digit amp-low amp-high. The amp-low value = low group frequency. The amp-high value = high group frequency.
If you do not specify the amplitudes of DTMF or MFR1 tones, the default value of 16384
(–9 dBm) is applied.
Description
Configures the ringback tone method for a specified line on the current VISM
card.
Assigns a tone plan to a specified VISM card line.
Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
Deletes the tone plan configuration of a specified VISM card line.
Deletes a previously added tone plan from the current VISM card.
Displays the ringback tone method for a specified line on the current VISM
card.
Displays the tone plan configuration of a specified VISM card line.
Displays the configured timeout periods for all call progress tones of a
specified VISM card line.
Displays the tone configuration of a specified tone plan—either a
preconfigured (built-in) or user-added tone plan.
Displays the tone configuration of all tone plans—either preconfigured
(built-in) or user-added tone plans.
Displays all user-added (provisional) tone plans.
partially or completely matches the name you supply.
Cisco VISM Installation and Configuration Guide
addtoneplan
5-47
Advertisement
Table of Contents
