Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 200

clrcacfailcntrs
clrcacfailcntrs
To reset all connection admission control (CAC) failure statistics to 0, use the clrcacfailcntrs command
in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
This command is used for debugging purposes to reset counters and isolate any VISM CAC-related
failures. Counter values more than zero indicate that the gateway is low on resources.
Examples
The following example shows that the CAC failure statistics are reset to 0:
clrcacfailcntrs
Related Commands Command
dspcacfailcntrs
Cisco VISM Installation and Configuration Guide
5-56
clrcacfailcntrs
Description
Displays all CAC failure statistics that are reset to 0.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands