Table of Contents
Advertisement
Chapter 5
CLI Commands
dspcasvars
To display the parameters of all channel associated signaling (CAS) variants configured on a VISM card,
use the dspcasvars command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
This command displays the following data for each CAS variant:
•
•
•
•
Examples
The following example shows that the parameters of all configured CAS variants are displayed for the
current VISM card:
dspcasvars
VariantName
-----------
Related Commands
Command
addcasvar
cnfcasvar
delcasvar
dspcasvar
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspcasvars
Variant name
File name
Digit method
Country code
FileName
--------
first
wink.dod
second
ring.dod
Description
Adds a CAS variant to a VISM card.
Configures CAS variant and CAS timing parameters for a variant already created
with the addcasvar command.
Deletes a CAS variant.
Displays information about CAS variants for a given variant name.
DigitMethod
CountryCode
-----------
-----------
DTMF
US
DTMF
US
Cisco VISM Installation and Configuration Guide
dspcasvars
5-317
Advertisement
Table of Contents
