Table of Contents
Advertisement
Chapter 5
CLI Commands
cnfsesretrans
To configure the timeout period for unacknowledged packets and number of retransmissions, use the
cnfsesretrans command in the VoIP switching/trunking operating mode.
Syntax Description
session-num
unack-timeout
max-ses-retrans
Command Modes
VoIP switching/trunking
Usage Guidelines
Use this command for a previously added PRI backhaul session.
When the maximum retransmissions have been made and there is still no acknowledgment, the session
is considered failed.
Examples
The following example shows that session number 2 is configured with a timeout period for
unacknowledged packets of 1000 ms and a maximum number of retransmission attempts of 20:
cnfsesretrans 2 1000 20
Related Commands
Command
cnfsesack
cnfsesmaxreset
cnfsesmaxseg
cnfsesnullsegtmout
cnfsesoutofseq
cnfsesport
cnfsesstatetmout
cnfsessyncatmps
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
cnfsesretrans session-num unack-timeout max-ses-retrans
Identifying session number in the range from 1 to 64.
Timeout period (defined in milliseconds) to send an acknowledgment. It can
be in the range from 100 to 65535. (Default = 600)
The maximum number of retransmissions. It can be in the range from 0 to
255. (Default = 3)
Description
Configures the timeout period before sending an acknowledgment, and the
maximum number of acknowledgments that can be accumulated.
Configures the maximum number of resets that a VISM card performs before
a connection is reset.
Configures the maximum segment size, in octets, that can be received by a
VISM card after sending a synchronize message.
Configures the idle time before sending a null segment.
Configures the maximum number of out-of-sequence packets that can be
accumulated before sending an EACK packet.
Configures the port numbers of a previously added PRI backhaul session.
Configures the number of milliseconds that VISM waits for a transfer state
before executing an auto reset.
Configures the maximum number of call agent synchronization attempts.
Cisco VISM Installation and Configuration Guide
cnfsesretrans
5-211
Advertisement
Table of Contents
