Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 401

Voice interworking service module release 3.0
Table of Contents

Advertisement

Chapter 5
CLI Commands
dellapdtrunk
To delete a Link Access Protocol D channel (LAPD) configured line, use the dellapdtrunk command in
the VoIP switching/trunking operating mode.
Syntax Description
line-num
Command Modes
VoIP switching/trunking
Usage Guidelines
You must use the dellapd command to delete the corresponding LAPD channel before you can delete
the LAPD trunk.
Examples
The following example shows that the LAPD configured line, line number 7, is deleted:
dellapdtrunk 7
Related Commands
Command
addlapdtrunk
addrtpcon
addrudptrunk
clrrtpcnt
cnflapdtrunkpvc
cnflntrunkcond
cnfrtpcon
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backhaul RUDP
delrtpcon
delrudptrunk
dsplapd
dsplapdtrunkpvc
dsplapdtrunks
dsprtpcnt
dsprtpcon
dsprtpcons
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dellapdtrunk line-num
Line number to delete. In the range from 1 to 8.
Description
Adds an LAPD trunk to a specific VISM card line.
Adds a static RTP VoIP trunking connection.
Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
Clears the RTP counters (statistics) for a specific static RTP connection.
Assigns the PVC trunk type that carries LAPD messages for the current VISM
card.
Enables or disables line conditioning on a VISM card line if a network alarm is
encountered.
Modifies an existing static RTP VoIP trunking connection.
trunk for a specified session.
Deletes a static RTP VoIP trunking connection.
Deletes an ISDN PRI backhaul RUDP session that is associated with an LAPD.
Displays data about an LAPD.
Displays the assigned PVC trunk type that carries LAPD trunk messages for the
current VISM card.
Displays the configuration data of all LAPD trunks.
Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.
Displays the configuration data of a specific static RTP VoIP trunking
connection.
Displays the configuration data of all static RTP VoIP trunking connections.
Cisco VISM Installation and Configuration Guide
dellapdtrunk
5-257

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vism 3.0

Table of Contents