Table of Contents
Advertisement
cnfrudptrunkrmtip
cnfrudptrunkrmtip
To modify the remote IP address of VISM used in the ISDN PRI backhaul Reliable User Datagram
Protocol (RUDP) trunk for a specified session, use the cnfrudptrunkrmtip command in the VoIP
switching/trunking operating mode.
Syntax Description
session-num
remote-ip-addr
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the remote IP address, 209.165.200.224, of VISM used in RUDP is
modified to session number 22:
cnfrudptrunkrmtip 22 209.165.200.224
Related Commands
Command
addlapdtrunk
addrtpcon
addrudptrunk
clrrtpcnt
cnflntrunkcond
cnfrtpcon
dellapdtrunk
delrtpcon
delrudptrunk
dsplapd
dsplapdtrunkpvc Displays the assigned PVC trunk type that carries LAPD trunk messages for the
dsplapdtrunks
dsprtpcnt
dsprtpcon
dsprtpcons
Cisco VISM Installation and Configuration Guide
5-202
cnfrudptrunkrmtip session-num remote-ip-addr
ISDN PRI backhaul RUDP session. It can be in the range from 1 to 64.
IP address of the remote VISM card, in dotted decimal format
(nnn.nnn.nnn.nnn).
Description
Adds an LAPD trunk to a specific VISM card line.
Adds a static RTP VoIP trunking connection.
Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
Clears the RTP counters (statistics) for a specific static RTP connection.
Enables or disables line conditioning on a VISM card line if a network alarm is
encountered.
Modifies an existing static RTP VoIP trunking connection.
Deletes an LAPD configured line.
Deletes a static RTP VoIP trunking connection.
Deletes an ISDN PRI backhaul RUDP session that is associated with an LAPD.
Displays data about an LAPD.
current VISM card.
Displays the configuration data of all LAPD trunks.
Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.
Displays the configuration data of a specific static RTP VoIP trunking
connection.
Displays the configuration data of all static RTP VoIP trunking connections.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
