Table of Contents
Advertisement
dspxgcpcon
dspxgcpcon
To display the attributes associated with a call agent established connection, use the dspxgcpcon
command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
conn-id
display-level
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the abbreviated level of attributes associated with the call agent
identified by the connection identification number 4C5B are displayed:
dspxgcpcon 4c5b 1
*********************************************************
*********************************************************
Call ID
Endpoint Name
Line Number
Connection ID
Admitted Codec
Admitted Pkt. period
Connection Mode
Echo Cancellation
Type of Service
Network Type
Remote Address Type
Continuity Test
Loopback
Local RTP Port
Remote RTP Port
Remote RTP Port Count
Remote Address
MGC Domain Name
MGC IP Address
MGC UDP Port
Port in Notified Entity
Protocol Version
Silence Suppression
SID
VAD Timer
CAS Type
Cisco VISM Installation and Configuration Guide
5-466
dspxgcpcon conn-id display-level
Connection identification number. It can be in the range of hexadecimal numbers
from 0 to f.
Detail level of display. It can be one of the following values:
1 = Abbreviated display
•
2 = Detailed display
•
Attributes of Connection ID: 4c5b
= C0011
= vism/T1-1/1
= 1
= 4c5b
= PCMA
= 10 ms
= sendrecv
= FALSE
= 0xa0
= IP
= Invalid (0)
= FALSE
= FALSE
= 49556
= 49544
= 1
=64.68.18.1
= mgc1
= Unknown
= 2427
= FALSE
= MGCP 0.1
= FALSE
= TRUE
= 250 ms
= None
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5
CLI Commands
Advertisement
Table of Contents
