Table of Contents
Advertisement
clrsarmsgcnt
clrsarmsgcnt
To clear the control message counters from a VISM card, use the clrsarmsgcnt command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures when you use this command.
Examples
The following example shows that the SAR control message counters are cleared from the current VISM
card:
clrsarmsgcnt
Related Commands
Command
dspsarmsgcnt
Cisco VISM Installation and Configuration Guide
5-62
clrsarmsgcnt
Description
Displays the SAR control message counter values for a VISM card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
