Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 608

dspxgcpcnt
dspxgcpcnt
To display the Simple Gateway Control Protocol (SGCP)/Media Gateway Control Protocol (MGCP)
message statistics for a specified call agent, use the dspxgcpcnt command in the VoIP
switching/trunking operating mode.
Syntax Description
ca-ip-address
Command Modes VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the SGCP/MGCP message statistics of the call agent are displayed:
dspxgcpcnt 209.165.200.204
IP
---------------
209.165.200.204
Related Commands Command
dspxgcpcnts
Cisco VISM Installation and Configuration Guide
5-464
dspxgcpcnt ca-ip-address
IP address of the call agent for which you want to display SGCP/MGCP message
statistics. It can be in dotted decimal format (nnn.nnn.nnn.nnn).
success msg
-----------
0
Description
Displays the SGCP/MGCP message statistics for all known call agents.
fail msg
----------
4
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands