Table of Contents
Advertisement
dellnloop
dellnloop
To delete the T1 or E1 local line loopback state for a VISM card, use the dellnloop command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
ds1-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the local loopback for line 6 is deleted:
dellnloop 6
Related Commands
Command
dspln
Cisco VISM Installation and Configuration Guide
5-260
dellnloop ds1-num
DS1 line number on the VISM card for which the local loop is to be deleted, in the
range from 1 to 8.
Description
Displays the data configured on a specified line.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
