Table of Contents
Advertisement
cnfpncon
cnfpncon
To set priority routing for a specified connection, use the cnfpncon command in the switched AAL1
SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2 trunking, and switched ATM AAL1 SVC
operating modes.
Syntax Description
lcn
route-priority
Command Modes
Switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2 trunking, and switched ATM
AAL1 SVC
Usage Guidelines
The Private Network-to-Network Interface (PNNI) routing priority feature requires you to use a PXM1E
or PXM45 in your MGX 8000 Series switch chassis.
Examples
The following example shows that the priority routing for connection 145 is set to the lowest priority:
cnfpncon 145 15
Related Commands
Command
dspcon
Cisco VISM Installation and Configuration Guide
5-188
cnfpncon lcn route-priority
The logical channel number. It can be in the range from 131 to 510.
Route priority. It can be in the range from 1 to 15 (lowest). (Default = 8)
Description
Displays the parameters for a specified channel.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
