Table of Contents
Advertisement
dsptoneregionplans
dsptoneregionplans
To display a list of all tone plans for the countries and regions whose name partially or completely
matches the name you supply, use the dsptoneregionplans command in the VoIP switching/trunking and
switched AAL2 PVC operating modes.
Syntax Description
tonep-region
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that all tone plans associated with the partial tone plan region Uni are
displayed:
dsptoneregionplans "Uni"
Status
---------
configure
configure
Number of Matching Tone Plans = 2.
Related Commands
Command
addtoneplan
cnflnringback
cnflntoneplan
cnflntonetimeout
dellntoneplan
deltoneplan
dsplnringback
dsplntoneplan
dsplntonetimeout
Cisco VISM Installation and Configuration Guide
5-450
dsptoneregionplans tonep-region
Tone plan country or region for which you want to display associated tone
plans. It can be in the range from 1 to 64 alphanumeric characters and can
contain underscores ( _ ). This value is case sensitive.
Note
Tone Plan Region
----------------
UnitedKingdon
UnitedStates
Description
Adds a tone plan to the current VISM card.
Configures the ringback tone method for a specified line on the current VISM
card.
Assigns a tone plan to a specified VISM card line.
Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
Deletes the tone plan configuration of a specified VISM card line.
Deletes a previously added tone plan from the current VISM card.
Displays the ringback tone method for a specified line on the current VISM
card.
Displays the tone plan configuration of a specified VISM card line.
Displays the configured timeout periods for all call progress tones of a
specified VISM card line.
You must enter at least a partial tonep-region value and the value must
be enclosed in quotation marks.
Version
Tone Plan File Name
-------
-------------------
11
BUILTIN
11
BUILTIN
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
