Change Of Polarization Of Antenna - NEC iPasolink 200 Manual

5-12
Procedure 5-1
(1)) ODU Direct Mounting Type Antenna (ANDREW example #1)
Notes
1 Keep the antenna stand horizontally,
2 If you change to H polarization, loosen the four screws with the Allen key
wrench and then rotate the Transition hub of feed, keeping the antenna stand
horizontal.
Note
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only

Change of Polarization of Antenna

1. The details are referred to the installation manual which is attached to
the antenna. The installation or removal of the antenna requires qualified
experienced personnel.
2. The antenna is set to V-polarization when shipped from the factory.
Transition hub
2 Screws
Do not remove the screw complete from the screw hole.
Hold the feed horn with hand.
2 Screws
ODU MOUNTING
Installation