Connecting Control Cables - Sirona ORTHOPHOS SL 2D Installation Manual

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
L35 L37
64 95 142 D3632
D3632.031.01.02.02 03.2016
10.4

Connecting control cables

L35
L36
L37
A Device
B Ceph arm
C LAN coupling
IMPORTANT
Use the LAN coupling supplied (C) to connect cables L37 and L40.
1. Connect the unit and the Ceph arm as shown in the connection
diagram above.
2. Screw in place the plug connections L35/L38.
3. Roll the plug connection L36/L39 into a loop and secure it with a cable
tie.
IMPORTANT
not
Do remove cable L36.
L36
4. Grasping inside the ceph arm tube from below, carefully pull cable
L35 (two green Cat5 cables) and then cable L37 (green Cat5 cable)
downward and out of the support arm.
10 Installation: Ceph arm
10.4 Connecting control cables
A B
C
L38
L39
L40
99