2S037: Test Step 2 - Sirona ORTHOPHOS SL 2D Installation Manual

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
64 95 142 D3632
D3632.031.01.02.02 03.2016
S037: Test step 2
11.12.7.2
Setting the default IP address, default gateway address and default
subnet mask
IMPORTANT
The network address can only be restored to the factory setting (default
value) in fixed address boot mode (STATIC or no DHCP).
Symbol on the control
panel
Patient symbol key 1 (A)
Patient symbol key 2 (B)
Patient symbol key 3 (C)
1. Call service routine S037.2.
 Once the service routine has been selected, the network data is
displayed as in test step 1 [ → 167].
 The Memory key and the R key also become visible.
 The Memory key lights up.
2. Use the patient symbol keys (A, B, or C) to check the network data
existing in the system prior to the restore operation (see table).
 The patient symbol key selected in each case lights up.
3. To reset the network data, press the Memory key (E) (R key lights up)
followed by the R key (F).
 The default network data (factory default setting) is displayed. To
toggle the display of the various items of network data, proceed
as in test step 1 [ → 167].
4. Exit the service routine.
5. Perform a restart of the unit.
11 Commissioning, demo mode and repacking
11.12 Service routines for commissioning and repacking
Status Meaning
lit The IP address is displayed in
selection field 1*
lit The default gateway is displayed
in selection field 1
lit The subnet mask is displayed in
selection field 1
169