Inserting The Forehead And Temple Supports; Inserting The Ceph Sensor (For Ceph Versions); Installing The It Package - Sirona ORTHOPHOS SL 2D Installation Manual

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
64 95 142 D3632
D3632.031.01.02.02 03.2016
11.2

Inserting the forehead and temple supports

➢ Insert the forehead and temple supports until they lock in place.
11.3

Inserting the ceph sensor (for ceph versions)

NOTICE
Damage to the sensor
The sensor is a sensitive component, and therefore must be handled
with special care.
➢ NOTICE! Ensure that the correct sensor for cephalometry (ceph
sensor) is plugged in.Insert the ceph sensor
(A) carefully upward into the holder until it audibly clicks into place.
11.4

Installing the IT package

Information on the connection of the Reconstruction and Control Unit
(RCU) and the software installations can be found in the separate
"ORTHOPHOS SL Software Installation"
11 Commissioning, demo mode and repacking
11.2 Inserting the forehead and temple supports
(REF 65 44 287) instructions.
105