Attaching Flat Panel Detector Or Dummy Weight - Sirona ORTHOPHOS SL 2D Installation Manual

6 Installing the sensor unit
6.4 Attaching Flat Panel Detector or dummy weight
3x M4x10
68
6.4

Attaching Flat Panel Detector or dummy weight

IMPORTANT
A dummy weight is attached in place of the Flat Panel Detector on the
"ORTHOPHOS SL 2D" and "ORTHOPHOS SL 2D Ceph" unit versions.
The dummy weight is attached the same way as the Flat Panel Detector.
Installing the Flat Panel Detector
1. Carefully remove the Flat Panel Detector from the packaging.
3x M4x10
2. Fit the Flat Panel Detector from above into the guide of the rotation
unit and secure the detector immediately with the 3 screws (C).
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
C
64 95 142 D3632
D3632.031.01.02.02 03.2016