11 Commissioning, demo mode and repacking
11.12 Service routines for commissioning and repacking
142
S017: Test step 6
11.12.3.4
Activate / deactivate the remote control display
Selection field
1
* factory settings
1. Call service routine S017.6.
Once the service routine has been selected, the code for the
current setting is displayed in selection field 1.
2. Use the arrow keys (A) to select the code for the required setting in
selection field 1 (see table).
Once the required setting has been selected, the Memory key (B)
lights up.
3. Save the setting.
4. Exit the service routine.
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
Code
Function
00
Display inactive*
01
Display active
D3632.031.01.02.02 03.2016
64 95 142 D3632