Wall Mounting (Standard And Option 1) - Sirona ORTHOPHOS SL 2D Installation Manual

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
In case of mounting on weight-bearing
wood structures
64 95 142 D3632
D3632.031.01.02.02 03.2016
5.3

Wall mounting (standard and option 1)

NOTICE
Reduced image quality
Note the wall and ground conditions. If a carpet is present at the unit
installation site, it must be removed.
Each wall plug must support a tensile force of 700 N.
The wall construction must be suitable for the installation of the unit.
Use the enclosed wood screws and washers from the mounting kit for
mounting the unit on weight-bearing wood structures.
2x 8x80
2x Ø 8,4
Setting up the unit
NOTICE
Possible transport damage
Leave the center styrofoam packaging attached to the unit for
protection.
1. Remove the profile cover (A).
2. Position the two installation aids (B) at the foot (C) of the unit and
secure their position with adhesive tape.
CAUTION! The installation aids must be placed on top of each other
in such a way that their openings lie on top of each other.
5 Installation: X-ray unit
5.3 Wall mounting (standard and option 1)
49