Installation; Ceph Arm Mounted On Left-Hand Side - Sirona ORTHOPHOS SL 2D Installation Manual

Hide thumbs Also See for ORTHOPHOS SL 2D:
Table of Contents

Advertisement

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
C
64 95 142 D3632
D3632.031.01.02.02 03.2016
10.3

Installation

10.3.1

Ceph arm mounted on left-hand side

Preparing the unit
1. Loosen the screws (A).
A
2. CAUTION! Do not yank out the ambient light cable!
Remove the cover (B).
Tip: You can even leave the cover (B) on the unit and push it upwards
a little.
3. Remove the cover (C) by pulling it upwards.
4. Reattach the cover (B).
5. Detach the cable fastening.
6. Unpack the cables.
7. Pull the cable a short way behind the cover.
B
8. Run out the cable (as shown in the adjacent image) and fasten it with
adhesive tape.
9. Screw the four bearing bolts (D) into the unit.
4x
D
10 Installation: Ceph arm
10.3 Installation
91

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orthophos sl 2d / cephOrthophos sl 3dOrthophos sl 3d / ceph

Table of Contents