Installation Version 2: With Spiral Cable - Sirona ORTHOPHOS SL 2D Installation Manual

Hide thumbs Also See for ORTHOPHOS SL 2D:
Table of Contents

Advertisement

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
A
B
64 95 142 D3632
D3632.031.01.02.02 03.2016
7.4.2

Installation version 2: With spiral cable

Operation of the remote control via the membrane keyboard is
prohibited when installing the remote control with release button.
1. Use an awl to puncture the membrane keyboard at the prepared
points (A) from the rear.
2. Using the two screws (C), fasten the release button holder (B) to the
keyboard.
C
3. Plug the connector of the coiled cable into socket X101 on board
DX42 and screw the connector down tight.
X101
4. Hook the coiled cable onto the strain relief (D) of the assembled
chassis.
5. Connect control cable L117 (see section "Installation version 1:
Without coiled cable [ → 76]").
D
CAUTION
7 Installation: Remote control
7.4 Connecting the control cables (REMOTE)
77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orthophos sl 2d / cephOrthophos sl 3dOrthophos sl 3d / ceph

Table of Contents