11 Commissioning, demo mode and repacking
11.12 Service routines for commissioning and repacking
170
S037: Test step 3
11.12.7.3
Configuring boot mode
Selection field
1
* Factory setting
1. Call service routine S037.3.
Once the service routine has been selected, the current boot
mode of the unit is displayed in selection field 1.
2. Use arrow keys (A) to select the required boot mode "automatic
address assignment" (DYNAMIC) or "fixed address" (STATIC) in
selection field 1 (see table).
The Memory key (B) lights up.
3. Save the setting.
4. Exit the service routine.
Installation Manual ORTHOPHOS SL
Parameters
Meaning
DYNAMIC
Automatic address assignment
(DHCP/AutoIP)
STATIC
Fixed address*
Sirona Dental Systems GmbH
64 95 142 D3632
D3632.031.01.02.02 03.2016