Sirona ORTHOPHOS SL 2D Installation Manual page 176

11 Commissioning, demo mode and repacking
11.12 Service routines for commissioning and repacking
176
 The sub menus of the
structure tree.
8. Select the desired service routine in the structure tree, e.g. S008.3.
 The service routine, e.g. S008.3 is displayed.
NOTE: In terms of entry or setting options, the service routines of
the Web service correspond to the service routines that can be
called using the control panel (see chapter "Perform service
routines via the control panel").
9. Enter the desired parameters in the service menu and confirm the
entries by clicking the
 The settings are accepted.
10. Follow the same approach for the next service routine.
11. Once you have made all of the necessary settings, exit the Web
service again.
To do this, click on the
"Service Exit"
and then on the
IMPORTANT
Until the connection to the web service is removed using the
Exit"
button, the operation of the unit with the user interface remains
blocked.
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
"Service"
menu are displayed in the
"Submit Changes"
button.
"Service DONE"
button in the structure tree
button in the following menu.
D3632.031.01.02.02 03.2016
"Service
64 95 142 D3632