S018: Service For Height Adjustment - Sirona ORTHOPHOS SL 2D Installation Manual

11 Commissioning, demo mode and repacking
11.12 Service routines for commissioning and repacking
SR*
S018
S018.2
S018.3
S018.4
S018.5
S018.6
S018.7
S018.8
S018.9
S018.10
148
11.12.4

S018: Service for height adjustment

SA** Function
Service for height adjustment
No Set the maximum travel height
No Undo the maximum travel height setting
No Check the height adjustment sensor system
No Setting the minimum travel height
No Undoing the minimum travel height setting
No Nominal angle setting for the occlusal bite block (as required by the
customer)
No Functional test of the occlusal bite block
No Calibrating the occlusal bite block
No Setting the PWM values for the height adjustment creep speed (PWM =
Pulse Width Modulation)
* SR=service routine, ** SA=security access
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
64 95 142 D3632
D3632.031.01.02.02 03.2016