11 Commissioning, demo mode and repacking
11.1 Attaching the covers
E
104
11
Commissioning, demo mode and
repacking
11.1
Attaching the covers
F
For installation with floor stand only:
1.
the base plate. The two covers (F) and (G) must hold together after
they have been attached.
2. Attach the profile cover (J).
To do this insert it into the guide at the bottom and fasten it to the
middle bracket on the unit stand using the screw (H).
3. NOTICE! Make sure that intermediate piece (K) lies flush on the
stand surface.
Insert intermediate piece (K) in the gap.
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
G
Place the four spring clips (E) on
64 95 142 D3632
D3632.031.01.02.02 03.2016