S017: Configuration Service - Sirona ORTHOPHOS SL 2D Installation Manual

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
SR*
S017
S017.2
S017.3
S017.4
S017.6
S017.8
S017.13
S017.14
S017.15
S017.18
64 95 142 D3632
D3632.031.01.02.02 03.2016
11.12.3

S017: Configuration service

NOTE: The unit can also be configured via the web service via service
routine [ → 174] S017.
IMPORTANT
After making changes to the unit configuration, error message E71130
appears on the control panel's touchscreen. Additional service routines
can be performed.
Before a patient exposure can be performed, the error message must
be acknowledged with the "R" button and the unit must be restarted.
SA** Function
Unit configuration
yes Configuring the hardware version
yes Enter the country group code
yes Select a language
yes Enable/disable the remote control
yes Selecting the kV/mA level series
yes Enable/disable the welcome screen
yes Enable/disable certain lines of the welcome screen
yes Activate/deactivate the acoustic signal for end of exposure
yes Activation of occlusal bite block function
* SR=service routine, ** SA=security access
11 Commissioning, demo mode and repacking
11.12 Service routines for commissioning and repacking
137