Sirona ORTHOPHOS SL 2D Installation Manual page 118

11 Commissioning, demo mode and repacking
11.8 Setting up the X-ray component
Adjusting the network data
118
3. Adjust the network configuration (IP address, subnet mask and
standard gateway) to your network.
"Save"
4. Click the button to save the settings.
5. Wait until the saving operation has been completed.
NOTICE! If you receive an error message when saving the network
configuration then the network data entered is probably invalid.
Repeat the entire procedure with valid network data.
6. Then click the button marked
 The menu closes.
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
"Exit"
.
64 95 142 D3632
D3632.031.01.02.02 03.2016