Sirona ORTHOPHOS SL 2D Installation Manual page 154

11 Commissioning, demo mode and repacking
11.12 Service routines for commissioning and repacking
154
2. Use the arrow keys (H) in selection field 1 to select the required
program group.
3. Use the arrow keys (I) to select the required nominal angle (possible
range: -17° to +22°).
Tip: You can also set the required angle manually on the occlusal bite
block and transfer this angle to selection field 2 by pressing the T key
(J).
By pressing patient symbol key 1 (G) you can activate and deactivate
the laser light localizer. You can use the laser light as a reference for
the angle adjustment. When the laser light localizer is activated, the
patient symbol key 1 is lit.
 The Memory key (B) lights up.
4. To save the nominal value, touch the Memory key (B) (R key (C)
lights up) followed by the R key (C).
5. Exit the service routine.
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
64 95 142 D3632
D3632.031.01.02.02 03.2016