Remove The Transport Safety Device; Installing Tube Assembly Cover - Sirona ORTHOPHOS SL 2D Installation Manual

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
A
D
64 95 142 D3632
D3632.031.01.02.02 03.2016
5.5

Remove the transport safety device

1. Remove transport safety devices (A) on board DX32 before starting
up the unit.
2. Keep transport safety devices (A) in a safe place. You will need them
should the unit be moved again.
5.6

Installing tube assembly cover

1. Loosen screw (A) on the unit's swivel (approx. 3-4 turns).
2. Fit the "Top tube assembly cover" (B) under the cover of the swivel
onto the screw (A).
B
3. Slide the "Bottom tube assembly cover" (C) from below onto the tube
assembly and secure it with the 4 screws (D) (supplied with the unit).
4. Clip the "Top tube assembly cover (B) into the "Bottom tube assembly
cover" (C) and re-secure the "Top tube assembly cover" (B) with the
screw (A).
C
4x M4x10
5 Installation: X-ray unit
5.5 Remove the transport safety device
63