Transport Without Pallet (Exception) - Sirona ORTHOPHOS SL 2D Installation Manual

4 Delivery and transport
4.3 Transport to the installation site
C
40

Transport without pallet (exception)

4.3.1.2
If the pallet is too wide for transport to the installation site, you may
unscrew the pallet from the wooden support (A) and transport the unit by
means of the wooden supports without the pallet.
NOTICE
Possible transport damage
Leave the center styrofoam packaging attached to the unit for
protection.
If this is not possible, secure the position of the tube assembly prior to
further transport.
➢ Secure the position of the tube assembly using the strap provided
(see label on the styrofoam packaging).
➢ Tighten the strap only gently. Do not tension the strap.
1. Remove the surrounding packaging.
2. Take the remote control (if supplied) out of the center styrofoam
packaging and store everything in a safe place.
3. Remove the two lateral styrofoam packaging parts.
4. Loosen the four screws (B).
5. Pull the carrying handles (C) out of their holders and insert them
through the drillings (D) of the wooden support (A) from the inside.
6. Insert screws (B) through drillings (E) and into the drillings of the
carrying handles to attach them firmly. The handles can be made
E
short or long.
The carrying handles have rims which prevent them from slipping out
of the holes.
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
64 95 142 D3632
D3632.031.01.02.02 03.2016