Safety Instructions; Information On The Unit; Fixed Connection; Ventilation Slots - Sirona ORTHOPHOS SL 2D Installation Manual

2 Safety instructions
2.1 Information on the unit
Accompanying documents
Electrostatic discharge (ESD)
Identification of single use devices
12
2

Safety instructions

2.1

Information on the unit

The following symbols are applied to the unit:
Accompanying documents
This symbol is affixed next to the unit rating plate.
Meaning: When operating the unit, observe the operating instructions.
This symbol is affixed on the unit rating plate.
Meaning: The accompanying documents are available on the homepage
of Sirona.
Connector pins or sockets bearing ESD warning labels must not be
touched or interconnected without ESD protective measures. See also
"Electrostatic Discharge" and "Electromagnetic Compatibility" [ → 14].
Single use hygienic protective sleeves
Prior to each exposure, the hygienic protective sleeves (single use
devices) must be fitted.
Single use devices are identified with the symbol shown on the left. They
must be disposed of immediately after use. Do not use single use devices
more than once.
2.2

Fixed connection

DANGER
Potentially lethal shock hazard!
Fixed connection!
Installing a mains plug instead of the specified fixed connection infringes
international medical regulatory actions and is prohibited. In case of
error, this puts patients, users, and other parties seriously at risk.
2.3

Ventilation slots

Never cover the ventilation slots on the unit under any circumstances,
Ventilation slots
since this may obstruct air circulation. This can cause the unit to overheat.
Under no circumstances may the ventilation slots on the sensor unit be
SL sensor ventilation slots
covered, since otherwise the air circulation in the sensor unit will be
obstructed. This can cause the sensor unit to overheat.
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
64 95 142 D3632
D3632.031.01.02.02 03.2016