Sirona ORTHOPHOS SL 2D Installation Manual page 61

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS SL
Ø 10mm
Ø 3/8"
U
64 95 142 D3632
D3632.031.01.02.02 03.2016
9. Retighten screw (P) firmly.
P
Attaching to the wall and floor
IMPORTANT
Use the long wall holder for the floor stand installation.
1. Mount the upper wall holder.
IMPORTANT
Observe the required movement range of the unit during installation.
2. Slide the unit with the assembled floor stand up to the wall.
1980 mm
78"
3. Attach the unit
2x M8
Place the screws (U) in the grooves.
2x 8,4
Ø
Screw the unit onto the wall holder
2x M8x30
(V).
NOTICE! Do not tighten the screws firmly.
4. Level the unit again in both directions with the help of the spirit level
and tighten the screws on the wall holder firmly.
V
5.4 Installing the floor stand (option 2)
loosely
to the upper wall holder:
loosely
5 Installation: X-ray unit
using nuts and washers
61