Enable Sftp Server - NetComm NTC-400 Series User Manual

Item
Max. FTP Clients
PASV Mode
Port Range of
PASV Mode
Auto Report
External IP in
PASV Mode
ASCII Transfer
Mode
FTPS (FTP over
SSL/TLS)
7.3.1.1

Enable SFTP Server

Additional security for FTP transmissions is provided by the SFTP server option.
To access the SFTP Server Configuration screen, select FTP from the Administration submenu and go to the SFTP Server
Configuration section:
Item
SFTP Disabled by default.
SFTP Port Port 22 is the default
setting.
NTC-400 Series
Notes
5 Clients are the default Specify the maximum number of clients for the FTP
setting. connection. Up to 32 clients are supported.
Check  Enable to activate the support of PASV mode for
Optional setting
a FTP connection from FTP clients.
Port 50000 - 50031 is Specify the port range to allocate for PASV style data
the default setting. connection.
Value Range: 1024 - 65535.
Check  Enable to activate the support of overriding the
Optional setting.
IP address advertising in response to the PASV command.
Check  Enable to activate the support of ASCII mode
Optional setting.
data transfers.
Binary mode is supported by default.
Check  Enable to activate the support of secure FTP
Optional setting.
connections via SSL/TLS.
Table 215 – FTP Server Configuration
Figure 347 – SFTP Server Configuration
Notes
Check  Enable to activate the embedded SFTP Server function.
With the SFTP Server enabled, you can retrieve or delete the
stored log files via secure SFTP connection.
Specify a port number for SFTP connection.
The router will listen for incoming SFTP connections on the
specified port.
Value Range = 1 - 65535.
Table 216 – SFTP Server Configuration
Description
Description
© NetComm Wireless 2019
303 of 359