Create Root Ca - NetComm NTC-400 Series User Manual

To view the current Root CA details, from the Object Definition submenu select Certificate then click its Configuration tab:
4.5.1.1

Create Root CA

Click the Generate button to open the Root CA Certificate Configuration section. Enter the required details to create a CA
Certificate.
Item
Name Enter text string.
Mandatory field.
Key Mandatory field. This field is to specify the key attributes of the certificate.
Subject Mandatory
Name fields.
Validity Mandatory field. Select the validity period of certificate from the drop down list.
Period
172 of 359
© NetComm Wireless 2019
Figure 203 – Root CA
Notes
Enter a Root CA Certificate name. It will be a certificate file name.
Maximum length: 8 letters (no numbers or special characters)
Key Type to set public-key cryptosystems. It only supports RSA now.
Key Length to sets the size measured in bits of the key used in a
cryptographic algorithm.
Digest Algorithm to set identifier in the signature algorithm identifier of
certificates
Specify the following details for the certificate.
Country (C) – The two-letter ISO code for the country where your
organisation is located.
State (ST) – The state where your organisation is located.
Location (L) – The location where your organisation is located.
Organization (O) –The name of your organisation.
Organization Unit (OU) – The name of your organisation unit.
Common Name (CN) – The name of your organization.
Email - The email of your organisation.
Must be in the email address style, e.g. john.doe@gmail.com
Table 119 – Root CA Certificate Configuration
Description
User Guide