Table of Contents
Advertisement
6.2.4.1
MAC Control with Black List Scenario
As shown in the diagram above, enable the MAC control function and specify the "MAC Control Rule List" as a black list, and
configure one MAC control rule for the router to deny the connection request from the "JP NB" with its own MAC address
20:6A:6A:6A:6A:6B.
The system will block the connection from "JP NB" to the router but allow others.
6.2.4.2
MAC Control Settings
To enable the MAC Control functionality:
1
Select Firewall from the Security submenu on the left and then open the MAC Control tab.
2
Go to the Configuration section of the MAC Control page:
Click MAC Control Enable and set the following parameters:
3
Item
MAC Controls
Black List /
White List
254 of 359
© NetComm Wireless 2019
Figure 290 – MAC Control with Black List Scenario
Figure 291 – Enable MAC Control
Notes
Check Enable to activate the MAC Control
Checkbox, disabled by
default.
functionality.
Drop down list
When Deny those match the following rules is selected
packets that meet the criteria of the rule will be blocked
Deny those match the
– "black listed"– and any other packets will be allowed
following rules is the
to pass.
default setting.
In contrast, Allow those matching the following rules
will allow those packets that meet the criteria of the
rule to pass, i.e. those that are part of the "White List",
and the rest will be blocked.
Description
User Guide
Advertisement
Table of Contents
