NetComm NTC-400 Series User Manual page 236

Item
Add Button
Delete Button
Refresh Button
Client details Fields in row.
Delete Button
Enable Button
Edit Button
Select Checkbox
When Add or Edit button is applied, the PPTP Client Configuration window will appear:
236 of 359
© NetComm Wireless 2019
Notes
Click the Add button in the User Account List to open the User Account
Configuration screen where you can create new user accounts, see next
section.
Up to ten (10) client accounts can be created.
Click  Select on one or more Client descriptions and then click the Delete
button to permanently remove them from the list.
Click the Refresh button to test the connection.
The following details are displayed for each client: ID number, Tunnel
Name, Interface, Virtual OP address, Remote IP/FQDN address, Remote
Subnet address, connection Status, and Enable/Disabled status.
These are all set in the PPTP Client Configuration window. See the next
section for details regarding these settings.
Click  Select for the User Account that you want to permanently delete
and then click the Delete button.
Click the Edit button to select Tunnel  Enable in the PPTP Client
Configuration window.
Note that you can uncheck  Enable rather than permanently Delete, this
will allow you to retain the user details while disabling its access to the
PPTP client.
Click the Edit button to make changes to the client in the PPTP Client
Configuration window.
Click  Select on one or more Client descriptions and then click the Delete
button to permanently remove them from the list.
Table 164 – PPTP Client List & Status
Figure 273 – PPTP Client Configuration
Description
User Guide