Physical Gps Connection And Indicators; Gps Antenna Micro Usb Interface; To Enable Gps Functionality - NetComm NTC-223 User Manual Appendix

Optional gps functionality

Hide thumbs Also See for NTC-223:

Table of Contents

Physical GPS connection and indicators

The optional Navisys GR-701U GPS Receiver antenna can be connected through the Micro USB port to provide

GPS services and functionality.

The Micro USB port is located on the side of the router containing the reset button, SIM card slot, green six-way

terminal block connector and yellow RJ45 Ethernet port:

To establish a GPS connection and enable GPS functions on the user interface, do the following:

Connect the Navisys GR-701U GPS Receiver antenna's Type A USB cable connector to a Micro USB adaptor.

Plug the Micro USB adaptor into the Micro USB port on the side of the NTC-223.

When the antenna is powered on an orange light will appear on the top of the GPS antenna.

The GPS LED Indicator will begin to display as explained in the following section.

Optional GPS functionality on NTC-223 – User Guide Appendix

UG01192 v1.0 20 August 2019

Figure 1 – Micro USB port location

4 of 13

Table of Contents