Table of Contents
Advertisement
As shown in the diagram above, enable the URL blocking function and create the first rule to deny Web requests with the
defined patterns to go through the router. The system will block Web requests with the defined patterns to pass through the
router.
6.2.2.2
URL Blocking Settings
To enable the URL Blocking functionality:
1
Select Firewall from the Security submenu on the left and then open the URL Blocking tab.
2
Go to the Configuration section of the URL Blocking page:
Click Packet Filters Enable and set the following parameters:
3
Item
URL Blocking
Black List /
White List
Log Alert
Save
Undo
248 of 359
© NetComm Wireless 2019
Figure 284 – Enable URL Blocking
Notes
Check Enable to activate the URL Blocking
Checkbox, disabled by
default.
functionality.
Drop down list
When Deny those match the following rules is selected
packets that meet the criteria of the rule will be blocked
Deny those match the
– "black listed"– and any other packets will be allowed
following rules is the
to pass.
default setting.
In contrast, Allow those match the following rules will
allow those packets that meet the criteria of the rule to
pass, that is be part of the "White List", and the rest will
be blocked.
Check Log Alert to activate event logging for the
Disabled by default
selected rules.
Button
Click Save to save the setting.
Button
Click Undo to cancel the changes to settings.
Table 171 – Enable URL Blocking
Description
User Guide
Advertisement
Table of Contents
