NetComm NTC-400 Series User Manual page 258

Item
Source MAC Mandatory field.
Default selection: Any
Chat Software Multiple check boxes.
All unselected by default.
P2P Software Multiple check boxes.
All unselected by default.
Streaming Multiple check boxes.
All unselected by default.
Time Schedule Mandatory field.
Rule Disabled by default.
Save Button
258 of 359
© NetComm Wireless 2019
Notes
Select IP Address‐based Group from the drop down list to filter packets
coming from the selected group.
Note – Groups must be pre‐defined before this selection
become available in the drop down list.
Refer to Object Definition > Grouping > Host grouping.
Alternatively, click the Add Rule button that displays when
this drop down list is empty to create a new group.
This field specifies the source MAC address or addresses.
Select Any to filter packets coming from any MAC address.
Select Specific MAC Address to filter packets coming from a MAC
address entered in this field.
Select MAC Address‐based Group from the drop down list to filter
packets coming from the selected group.
Note – Groups must be pre‐defined before this selection
become available in the drop down list.
Refer to Object Definition > Grouping > Host grouping.
Alternatively, click the Add Rule button that displays when
this drop down list is empty to create a new group.
Check one or more Chat Software application filter functions you want
activate for this rule.
Available chat applications include: QQ, Facebook, Aliww and Line
Check one or more P2P Software application filter functions you want
activate for this rule.
Available P2P applications include: BT, HTTP Multiple, and Thread
Download
Check one or more data Streaming application filter functions you want
activate for this rule.
Available streaming applications include: MMS or RTSP
Select a Time Schedule from the drop down list to apply to this rule or
leave it as Always (i.e. without a time parameter).
If the drop down list is empty you will need to define a Time Schedule
using the Object Definition > Scheduling > Configuration tab.
Click  Enable to activate this rule then save the settings.
Click Save to save the settings.
Description
User Guide