NetComm NTC-400 Series User Manual page 81

Item
VLAN ID Mandatory field.
VLAN Tagging Default setting: Disable
NAT / Bridge Default setting: NAT
Port Members These boxes are unchecked by
default.
WAN & WAN All WANs are selected by default.
VID to Join
LAN IP Address Mandatory field.
Subnet Mask 255.255.255.0(/24)Default
setting:
DHCP Server Default setting: Server
/Relay
DHCP Server IP Mandatory field.
Address
(for DHCP Relay
only)
DHCP Server Mandatory field.
Name
IP Pool Mandatory field.
Lease Time Mandatory field.
Domain Name String format can be any text.
Primary DNS IPv4 format
Secondary DNS IPv4 format
NTC-400 Series
Notes
Define the VLAN ID number. The range is 1 to 4094.
The rule is activated according to VLAN ID and Port Members configuration
when Enable is selected.
The rule is activated according to Port Members configuration when
Disable is selected.
Select NAT mode or Bridge mode for the rule.
Select which LAN port(s) and VAP(s) that you want to add to the rule.
Select which WAN or All WANs that allow access to the Internet.
Note – If Bridge mode is selected, you need to select a WAN and enter a
VID.
Assign an IP Address for the DHCP Server that the rule uses. This IP address
is a router IP.
Select a Subnet Mask for the DHCP Server.
Define the DHCP Server type.
There are three types you can select: Server, Relay or Disable
Relay – Select Relay to enable DHCP Relay function for the VLAN group,
then fill in the DHCP Server IP Address field.
Server – Select Server to enable DHCP Server function for the VLAN group,
then specify the DHCP Server settings.
Disable – Select Disable to disable the DHCP Server function for the VLAN
group.
If you select Relay type of DHCP Server, assign a DHCP Server IP Address
that the router will relay the DHCP requests to.
Define name of the DHCP Server.
Define the IP Pool range.
There are Starting Address and Ending Address fields. If a client requests an
IP address from this DHCP Server, it will assign an IP address in the range of
IP pool.
Define a period of time for an IP Address that the DHCP Server leases to a
new device. By default, the lease time is 86400 seconds.
The Domain Name of this DHCP Server.
Value Range: 0 to 31 characters.
The Primary DNS of this DHCP Server.
The Secondary DNS of this DHCP Server.
Description
© NetComm Wireless 2019
81 of 359