Led Indicators - NetComm NTC-400 Series User Manual

No.
7 CELL1 AUX Socket
8 GPS Antenna Socket
1.2.2

LED indicators

LED Icon
Off
GPS On
Flashing
Off
On
PWR
Flashing one per second
Fast flashing
Off
2.4G On
Fast flashing
Off
5G On
Fast flashing
Off
SIM A
On
Off
SIM B
On
HIGH On
LOW On
On
WAN/
LAN1-3
Flashing
NTC-400 Series
Description
Connect one of the 3G/LTE Antennas here.
Connect the included GPS antenna to this socket.
Table 1 – Interfaces (Rear)
Status
GNSS function is disabled.
Location is fixed.
Fixing location.
Device is powered off or is in standby mode.
Device is powered on.
Device is in "Delay off" mode.
Firmware upgrade in process or device is in recovery mode.
2.4GHz Wi-Fi is disabled.
2.4GHz Wi-Fi is enabled.
Data is being transmitted via the 2.4GHz Wi-Fi network.
5GHz Wi-Fi is disabled.
5GHz Wi-Fi is enabled.
Data is being transmitted via the 5GHz Wi-Fi network.
No SIM inserted or the SIM slot is not being used for a 3G/4G connection.
SIM card is inserted and being used for a 3G/4G connection.
No SIM inserted or the SIM slot is not being used for a 3G/4G connection.
SIM card is inserted and being used for a 3G/4G connection.
3G/4G signal strength is at a high level.
3G/4G signal strength is at a low level.
Ethernet connection established on the corresponding LAN/WAN port.
Data is being transmitted or received on the port.
Description
Table 2 – LED indicators
Notes
© NetComm Wireless 2019
15 of 359